Ford F-150 Raptor Brings Baja Racing DNA to the Trail, Extreme Off-Road Performance Comes With Trade-Offs

US NewsLeave a Comment on Ford F-150 Raptor Brings Baja Racing DNA to the Trail, Extreme Off-Road Performance Comes With Trade-Offs

Ford F-150 Raptor Brings Baja Racing DNA to the Trail, Extreme Off-Road Performance Comes With Trade-Offs

A modified off-road Ford truck racing across the rugged desert terrain in Arequipa, Peru.
Photo by Sergio Benavides on Pexels

Most off-road vehicles on the road these days are derived from other segments or are original off-road creations in their own right (dune buggies, anyone?) the Ford F-150 Raptor, however, is one of the rare true production vehicles with genuine Baja racing blood running through its veins. Deriving technology from Baja machines built for off-road desert racing (think Fox Racing Shox, 35-inch all-terrain tires, four-wheel drive, desert-specific ride modes), the Raptor is designed to master sand dunes and all manner of desert terrain at speed. Unlike many other off-road vehicles, you won’t need to make changes to the Raptor’s chassis to make it eligible to participate in off-road competition.

But that kind of insane capability does come with a caveat. The Raptor’s wide, long-wheelbase and its weight pushing beyond 5,600 pounds can make it a bit clumsy for narrow forest access roads, steep ledge encounters or tight technical challenges. Skid plates, rock sliders and a solid recovery set up only go so far to making a Raptor trail ready, as you can’t really make big ol’ truck narrower or turn wide when faced with bottom-to-belly obstacles or the foliage of the jungle. Just keep that in mind for all the desert-mudding is, there are some off-road conditions where other trucks might perform better.

A red Ford Ranger Raptor pickup truck driving on a city street near a pedestrian with an umbrella
Photo by proudlyswazi on Unsplash

1. Ford F-150 Raptor Brings Baja Racing Performance to Production Trucks

When Ford unveiled the 2017 F-150 Raptor, it reset the bar for what factory-built off-road trucks could accomplish beyond the paved and the ho-hum. The truck’s tech can be traced all the way back to trucks racing the off-road Baja 1000 race, with a very specific purpose in mind high-speed desert speed over endless dirt trails. The F-150s we see pounding through the desert for off-road racing are, like almost everything else in that sport, largely inspired by SCORE International competition in Baja California a racing pursuit that began in 1967. Ford takes desert racing very seriously, and applies lessons learned there to the off-road trucks offered to off-road customers.

Ford Raptor’s Racing Foundation:

  • Inspired by Baja 1000 competition
  • Developed through desert racing
  • Focused on high-speed off-roading
  • Built for demanding terrain
  • Brings racing lessons to customers

The link to racing and production engineering is what makes the Raptor what it is. Ford wasn’t just trying to come up with a bold-looking new pickup the company wanted a pickup that could reasonably traverse a desert rapidly and also be retained as a usable road vehicle, and everything from the suspension to the drivetrain and its associated systems was built around that objective. This makes the Raptor big in the wide open spaces where a maximum track and stable handling lend themselves to speed. In other words, the Raptor is creating a defined territory racing desert ability without the hassle of building a complete race truck.

a blue truck parked in a parking lot
Photo by Michael Myers on Unsplash

2. Fox Racing Shox and Baja Mode Define Its Off-Road Capability

This trail-ready Raptor can handle some pretty extreme desert conditions once you start rolling, due to its appropriately specialized suspension and electrics. Baja Mode adjusts the suspension and the drivetrain to keep the truck level at speeds that will put a regular pickup into the behind of the driver. The dampers are Fox Racing Shox  internally bypass 3.0-inch units, and they help absorb the more energetic bumps from the large wave of terrain, and keep the tires firmly pressed to the track with pinpoint accuracy and all four tires are 35-inch BFGoodrich KO2 all-terrain tires that dig into the earth, whether it’s sandy, loose, rocky, or a little of all. Four-wheel-drive, of course.

Key Suspension and Off-Road Features:

  • Dedicated Baja driving mode
  • Fox 3.0-inch bypass dampers
  • Thirty-five-inch BFGoodrich KO2 tires
  • Advanced four-wheel-drive system
  • Suspension designed for major impacts

It’s not a series of individual mods that you can (and should) install one by one. Baja Mode helps you jump over the sometimes sudden change in terrain, the Fox shocks help you absorb the hits as you skate across the short and long obstacles over and over again, and the large all-terrain tires and four-wheel drive make sure you get traction no matter the quality of your tires. This type of system, at least in the case of continuing to forge ahead over the open plains, has less to do with inching forward than it does moving forward.

3. Lower Tire Pressures Help the Raptor Handle Desert Terrain

You’ll also want to reduce your psi in this part of the race hard-core off-road people as in another off-road job run 18-22 psi on loose stuff so the tires bog down and just glide over the dirt instead of rolling across it. Before you get the pressures off, this truck can turn baby sickening cat-tracks past 60 mph, which you undoubtedly have in your front window, what with the truck’s size and travel and a lack of trees and rocks in the way you need to clear a dune, work a beachcraft the bouncing and busting space is clutter-free.

Desert Driving Advantages:

  • Lower pressure improves tire flotation
  • Better traction across soft sand
  • Stable travel over severe whoops
  • Suitable for dune jumping
  • Performs confidently on open beaches

That, as they say, is where the magic happens. The desert roads, dunes and endless beaches allow the suspension to excel over a tough and sloppy surface without the necessity of crawling, or driving, at a snail’s pace between every obstacle. Instead, you carry momentum, your traction and your truck’s overall stability and maturity and don’t need to slow down and tackle each obstacle at an optimum pace. Clearly, the Raptor was built for a very specific environment. The knock-away toughness combined with the high sustained speeds that few other pickup trucks can enjoy without major modifications is definitely desert-oriented, and it’s very much baked into the entire package.

4. Baja 1000 Competition Demonstrates the Raptor’s Durability

This is the ultimate off-road challenge for all that Raptor engineering. SCORE off-road racing like the Baja 1000 push production Raptor vehicles through sand dunes and rock fields and sprawling mud bogs across hundreds of miles of courses that can reach nearly 960 miles in length out of San José del Cabo. Ford Racing has taken desert class wins with both Bronco Raptor and F-150 Raptor and is running in the SCORE Stock Mid-Size class rules, which requires teams to use factory engines, transmissions and drivelines and can only modify for safety and rule compliance. So racing in the element and the extreme conditions presents a demanding challenge for many production components.

What Racing Helps Demonstrate:

  • Long-distance desert competition experience
  • Silt beds and rocky sections
  • Heavy mud challenges
  • Factory powertrain components retained
  • Proven endurance under pressure

No, it also blights punishing repetition on drive-trains that still count for faraway from-paved roads, truck customers. “The truck takes the mixture of length, surface change, and body slam, where zero is not salvage-and we’ve got a lot of strength remaining in our joints.” For Ford, the race is really factory truck racing, which Ford will employ as a surrogate to know if the powertrain and structure are truly suffering. So, what we can say about the rules is they are sufficient to prevent the mechanical pieces from falling, to render the race, the race link, meaningful-but a truck does not qualify as a race car until it becomes one.

White pickup truck parked under trees in DeLand, Florida, on a sunny day.
Photo by Demar Cratic on Pexels

5. Race-Proven Upgrades Improve High-Speed Desert Performance

Race development there are simple possibilities for incremental improvements in pounding performance for the long haul Ford Racing engineers want to show you how to boost your pounding ability using a performance-tuned powertrain cooling system, an air-filtration system, suspension valving and calibration and a hydraulic bump stop system that can absorb the pounding of even the worst suspension pounding. And when you head to pound the desert dirt, apply the same principles with aftermarket parts King or Fox 3.0 bypass shocks to polish damping for multiple impacts, high-performance intercooler system to control heat and cut down on power, and a rear-mounted bed-mounted spare-tire carrier to share some weight load out of the truck’s bed.

Useful Desert Performance Upgrades:

  • King or Fox bypass shocks
  • High-performance intercooler installation
  • Improved powertrain cooling capacity
  • Upgraded suspension valving
  • Secure bed-mounted spare carrier

If you’re going to blow your aftermarket bills, spend ’em on mods that are actually drawing you to the truck-more shock control while your speed test is on every turn, more intercooler cooling while it stays warm and you’re warm, a dedicated spare carrier to keep a spare in a more accessible bed and still market the gear into the desert-or a handful of others. The same list of must-do’s keeps reappearing time and again whenever we head to a race-control heat, lock down suspension, keep things reliable and keep gear close. Nothing on this list will turn this Raptor into a different truck, but it’ll keep it moving onward and upward off the pavement.

6. The F-150 Raptor Excels Across Wide, Open Desert Terrain

The truck still proves itself as a high-velocity production pickup for its intended environment. Here, the F-150 Raptor’s suspension tuning, electronics, tires and four-wheel-drive system deliver open desert riding stability that a regular production truck showroom would find hard to match. To get to that same place with an ordinary pickup, you’d have to put in a lot of custom work. Ford also kept the Raptor this country’s roads so it could also be a non-competition vehicle, when the road ends and it’s time to go far afield, the truck’s racing lineage can be a good thing and the truck’s engineering feels very much in tune with the environment.

Where the Raptor Performs Best:

  • High-speed desert driving
  • Open-country off-road routes
  • Dune jumping and sand running
  • Rough terrain at speed
  • Everyday road-going usability

It’s worth contextualizing that power. Raptor is optimized for speed in wide-open spaces, not as a go-anywhere package. Its bigger body, heavy weight, and suspension dampers are optimized for desert running where high-speed handling is more important than guiding that much weight between obstacles. In the environment for which it was designed wide-open areas those features work well and provide great performance. In a tighter environment, those same choices can cause problems and difficulty getting around obstacles. That power is significant, but also highly specific.

A gray Ford truck featuring custom red rims parked outdoors in a lush green setting.
Photo by Garret Shields on Pexels

7. Wide Body Dimensions Create Problems on Narrow Trails

That’s when they really excel when off roaders get into tight, technical trails and remote exploring. During the evaluation at Michigan’s Bundy Hill Off-Road Park, the truck size is obvious in tight, low-clearance trails. Its wider stance (by 6 in., or 15 cm, over a typical F-150) because of the larger fender flares, makes for some challenges when trying to take the narrow woods roads and rugged, rocky trails. A truck built for rock crawling out in the desert for stability over countless whoops may not be the best choice for tight terrain, where a wide stance may be a bit awkward at first.

Challenges on Narrow Trails:

  • Six-inch wider body dimensions
  • Extended fender flares increase width
  • Difficult forest trail navigation
  • Limited space around obstacles
  • More demanding driver positioning

It’s not just a lack of driver assurance. Several trees, banks, and other obstacles have left little room to the left and right of the truck, and most trail rides and rocky passes don’t give a Raptor enough space to fit without risking contact. The wider truck means more chance of this, as well as more precise line selection. Drivers need to use their new truck like they’re more in the woods than the open country, where plenty of space would make this width advantageous and so proportions that help the Raptor in the desert compromise it in other backcountry uses. This may be a concern for buyers who think all off-road pickups should be flawless.

8. Heavy Weight and Long Wheelbase Limit Technical Trail Performance

One last consideration is weight, however, especially when the trail is boggy and demanding. While aluminum panels saved nearly 500 pounds, the Raptor was still over 5600 pounds, and that’s noticeable as you sift for rocks, blast over bumps and lean into the ramping off-camber hits. Driving a truck that heavy through tight spots demands finesse, that is, using just enough throttle to hold the truck on course and assuming the vehicle has momentum working for it, and gravity has everything else working against it when climbing out of holes and over rocks. Lighter was not the goal.

Weight-Related Trail Limitations:

  • More than 5,600 pounds
  • Aluminum panels save approximately 500 pounds
  • Greater effort on rocky sections
  • Challenging steep off-camber obstacles
  • Limited lightweight trail agility

Weight weighs heavily where momentum can’t do the work. On a fast desert run, the truck can ride the suspension through the washboard-and-chip terrain without slowing a lick on a tight trail, the driver can climb out of the seat, come to a halt, reorient and pick his way over the obstruction, one foot at a time. But be slammed more than 5,600 pounds and those advantages are mitigated, particularly if the terrain becomes steep or side hill. That aluminum-bodied truck helps minimize weight, of course, but it doesn’t turn a hefty full-size off-road assault vehicle into a sdragger, so you’re going to have to give something up to get those crawl-away-and-wait moves.

Powerful Toyota truck ready for an off-road adventure in a woodland setting.
Photo by Isaac Mitchell on Pexels

9. Toyota Tacoma, Jeep Gladiator and Colorado Offer Different Advantages

Raptor also has an effect on where and how the truck will operate at low speeds. The Terrain Management System includes Rock Crawl setting, and the electronically locking rear differential will help keep traction in challenging conditions. But, electronic aid can’t do anything about the physical size of the truck. Raptor’s wheelbase is a full 17.6 inches longer than the Toyota Tacoma’s, at 145 inches versus 127.4 inches, and its breakover geometry can be awkward at crested obstacles. These numbers matter if the route includes sharp transitions, tight switchbacks, or rugged terrain with irregular rock piles. A desert-oriented truck can be a headache in tight, rocky trails.

Alternatives for Different Off-Road Needs:

  • Tacoma suits narrower forest trails
  • Gladiator offers specialized crawling equipment
  • Colorado supports longer overland trips
  • Smaller body helps trail manoeuvrability
  • Different trucks suit different terrain

Crucial to technical off-roaders is breakover geometry and a wheelbase length. These factors determine whether or not your truck will crawl over an obstacle before smacking its underbody. A long wheelbase can make for a less than pleasing experience hauling over abrupt rise and fall segments of trail if there isn’t any wiggle room to choose a different approach angle. Rock Crawl and a rear locker are still handy tools to have on the Raptor, but they aren’t bullet-proof, and the geometry of the machine can’t be overridden. That’s something this truck isn’t built for.

Off-road pickup truck parked in Trona Pinnacles desert landscape at sunset.
Photo by Stephen Leonardi on Pexels

10. Skid Plates, Rock Sliders and a Winch Improve Trail Readiness

While it’s no direct competitor to the Raptor, the capability of the TRX can be augmented for more technical off-road adventures, or to maximise the truck’s on-trail safety net. An aftermarket set of skid plates can prevent front and rear underbody components from damage when you find yourself high-centred or make your way over any spiky outcrops and mounting some rock sliders along the side of the truck will offer some much-needed protection for body panels. And a good quality winch bolted to the front will give you some peace of mind if a more serious situation gets you stuck. It won’t solve the TRX’s size and weight issues, but it can soften the blow.

Practical Trail Protection Upgrades:

  • Install aftermarket underbody skid plates
  • Add strong steel rock sliders
  • Protect vulnerable body panels
  • Equip a dependable recovery winch
  • Improve off-road recovery preparedness

All of these add-ons can make sense, though, depending on the use-case. Skid plates are always useful if rock or rugged ground can hit the bottom of a truck. Rock sliders also are helpful when navigating tight areas to avoid striking objects. A winch is always good if a trail might be rough or starts to catch up to you, or the going suddenly gets tough. Considered in total, these items just make the Raptor a touch more ready for hardcore stuff, without turning it into something that it is not. You still will have to exercise caution in tight areas and in steep, technical terrain with a truck like this none of these add-ons can make a truck this size smaller or lighter.

John Faulkner is Road Test Editor at Clean Fleet Report. He has more than 30 years’ experience branding, launching and marketing automobiles. He has worked with General Motors (all Divisions), Chrysler (Dodge, Jeep, Eagle), Ford and Lincoln-Mercury, Honda, Mazda, Mitsubishi, Nissan and Toyota on consumer events and sales training programs. His interest in automobiles is broad and deep, beginning as a child riding in the back seat of his parent’s 1950 Studebaker. He is a journalist member of the Motor Press Guild and Western Automotive Journalists.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top