7 Ford Wildtrak Trail Problems That Could Leave You Stranded, Do You Know How to Handle Them?

AutosLeave a Comment on 7 Ford Wildtrak Trail Problems That Could Leave You Stranded, Do You Know How to Handle Them?

7 Ford Wildtrak Trail Problems That Could Leave You Stranded, Do You Know How to Handle Them?

The Ford Wildtrak is up for the rough and tumble of tough roads and off-road trails, but its advanced tech and mechanical systems can sometimes throw a wrench in the works. Whether it’s a frozen infotainment screen, a change in drive modes, throttle lag or transmission error, it can throw a spanner in the works for a trip, especially when far away from workshop support. If you know the signs and what to do, you can aid your vehicle through tough times, so find out when to take your Wildtrak in, how to spot common breakdowns and learn how to troubleshoot to keep your vehicle well prepared for the off-road journey.

Considering the realities of a comprehensive overlanding outing, take note of these mechanical and electrical gremlins you might run into. Camshaft sprockets and wet belt issues with diesel engines could turn into a catastrophic powertrain malfunction, while auxiliary battery drain could affect numerous electronic systems. Over-inflating the cargo tub, over-reaching roof weight and “snorting the dust in” can all lead to an overlanding headache. All these will hopefully have been covered by a recent recall service, a vehicle service plan and emergency kit contents, and importantly you’ll know when the symptoms are serious enough to seek trouble-shooting expert help especially if safety may be compromised.

black and gray car stereo
Photo by James Penner on Unsplash

1. Infotainment Screen Freeze

If the Portrait SYNC 4A screen in your Ford Wildtrak has gone black, blue or flickering it’s not just your entertainment system that is playing up. The off-road controls that are controlled from the screen are Rear differential lock Drive modes Trail Control 360 camera and Tyre pressures. Losing it all at once with a blank screen can be an extremely frustrating experience and lose many of the above. Other issues with the SYNC 4A touchscreen are a blank or frozen touch screen waiting for the reversing camera to activate and wandering for long roadtrips along unfamiliar tracks and trails.

Common SYNC 4A Display Problems:

  • Screen flickering or turning black
  • Frozen and unresponsive touchscreen controls
  • Delayed reversing camera images
  • Off-road modes failing to load
  • Navigation unavailable during screen failures

Ford has known of are documented in the service message SSM 52293 and SSM 52294, regarding the flickering screens and loading delay for off-road mode. Reverse camera problems have even spurred safety recall campaigns. These display problems are primarily software conflicts with the APIM infotainment module, though may include the hardware malfunction as well. When the screen goes black while you’re driving, first try a “soft reset” of your Ford by holding the seek-forward button and volume-down button for ten seconds. If that doesn’t fix your problem, try a “hard reset” by removing the negative terminal from your battery for 20 seconds.

Four-wheel drive selector knob with various modes
Photo by Obi on Unsplash

2. Spontaneous Drive Mode Switching

WestminsterFordIf you notice that suddenly your Ford Wildtrak is switching drive mode at random while driving on normal asphalt roads without any input from the driver, this could be the issue. Most common between 40-110 km/h, you will hear the centre console clicking and the instrument display suddenly switch to Baja, Sand, Rock Crawl or Slippery off-road mode. However, in severe situations, it will warn you about brake faults, will start to be extra heavy on the wheel and may attempt to switch to four-wheel drive high and/or low gear while on dry, high-traction roads.

Warning Signs of Unexpected Mode Changes:

  • Sudden switching between drive modes
  • Clicking noises from the console
  • Unrequested four-wheel-drive engagement attempts
  • Unexpected changes in steering effort
  • Dashboard warnings during normal driving

Potential failure areas include the All-Terrain Control Module and the actual physical rotary drive-mode selector. A Ford special service message, SSM 52380, has been issued to explain how to proceed when you notice clicking or ratcheting sounds coming from the rotary drive selector, since the solution is a software update rather than a parts replacement. To prevent four wheel drive from activating when you don’t want it to, you can select a different mode (via the steering wheel controls or by turning the vehicle off and then back on), leaving you in the Normal mode. If that doesn’t work, park safely, turn the ignition switch off, then on again this may clear the fault.

Close-up photograph of Go and Stop pedals in a vehicle, highlighting texture.
Photo by Mikhail Nilov on Pexels

3. Throttle Dropout and Acceleration Hesitation

Throttle dropout is even more unsettling when you’re doing 50km/h along a bumpy country road, or trying to cross a busy intersection in your Wildtrak. The symptoms usually occur when driving at low speed or out of a slow roll. Between pushing the accelerator pedal there’s a short, between two and four second delay in the revs, then the power reappears in a rush as the engine suddenly sends torque back to the wheels and the tyres spin up. The sudden change in torque can be dramatic enough to chirp the tyres, and you lose all confidence in the truck’s ability to merge into traffic!

Recognising the Dead Pedal Problem:

  • Two to four seconds hesitation
  • Accelerator produces no immediate response
  • Engine revolutions remain temporarily flat
  • Sudden power delivery follows hesitation
  • Symptoms appear during low-speed acceleration

The cause is being checked with transmission neutral-coast logic, ten speed gear hunting, knock-sensor stop, and forward-collision software calibration. Troublesome for technicians to notice is when the abnormality does not set off the usual check engine light and diagnostic codes during dealership checkup. Dead pedal early symptoms, as told by some, are between 3500 and 30,000 kilometres travelled. A fix that was reported was switching from Drive to Neutral then back to Drive before getting to the dealership for live data logging during diagnosis.

4. 10-Speed Transmission Shift Flaws and Valve Body Defects

Ford Wildtrak 10-speed automatic transmission faults are often quite obvious as drivers struggle with muddy/climbing road surfaces. Slamming 3-4 and 4-5 upshifts, or chugging downshifts as the truck tiptoes over a ledge can cause the truck to feel all over the place when there is needed to be precise with the power. Under TSB 26-2241, Ford identified a problem where F clutch friction plates were brinelling into the planetary container cylinder which could result in grey silt deposits within the transmission fluid filter, giving mechanics some direction to go in when diagnosing for internal transmission wear.

Transmission Problems Worth Watching:

  • Harsh 3-4 and 4-5 shifts
  • Hesitation during low-speed downshifts
  • Grey silt inside fluid filters
  • Mis-machined valve body components
  • Unexpected reverse gear engagement behaviour

Another safety issue is related to the valve bodies, which Ford recalls (agency number 25V164000, campaign number 25S19). If a transmission valve body has been mis-machined, the vehicle can experience a complete failure of reverse or start forward movement when selecting Neutral or Reverse. This is dangerous, especially when trying to maneuver around tight trails or parking lots. If rough shifting is apparent, do not continue trying to tow to the vehicle’s tow limit, as increased mechanical stress and heat can worsen the condition. Consider an additional transmission cooler. During the shop inspection, be sure to inspect the transmission filter for grey silt and confirm that all qualified valve body recalls have been performed.

diesel powertrain wear
Free picture: chrome, car engine, garage, vehicle, metal part, machine …, Photo by pixnio.com, is licensed under CC CC0 1.0

5. Diesel Powertrain Wear: Camshaft Sprockets and Wet Belts

Ford Wildtrak diesel owners must be mindful of one or two little engine-specific reliability issues before venturing into the wilds. The 3.0-litre V6 diesel has had issues with fractured LH camshaft sprockets (Australian recall REC-006341 and Ford service campaign 25S39). If the sprocket fails, the engine stalls immediately and the driver is left with no normal engine output. Loss of power steering assist and brake booster assist can make control of the vehicle very difficult. If out in the boondocks, attempting to get one’s vehicle restarted on the side of the road could be a futile exercise.

Important Diesel Engine Vulnerabilities:

  • Fractured V6 camshaft sprockets
  • Sudden engine stalling risk
  • EcoBlue wet belt deterioration
  • Diesel contamination inside engine oil
  • Restricted internal oil pickups

A 2.0-litre Eco Blue diesel offers another warning, which pertains to its oil-immersed timing belt. Inhibited diesel particulate filter (DPF) regenerations can cause raw diesel to enter the engine oil, which then slowly passes through the wet belt and ultimately causes the oil’s internal pickups to become blocked. If this problem occurs, never turn the engine off while it’s regenerating, though if the light comes on, maintaining engine revolutions in excess of 2,000 rpm for twenty minutes for this process to complete should also be highlighted to consumers. Owners who undertake repetitive long distance drives in challenging terrain should also halve their regular oil change intervals to prevent serious powertrain issues.

Auxiliary Battery Depletion and BMS Charging Traps
Auxiliary Battery & CTEK charger | Today I installed a dual … | Flickr, Photo by staticflickr.com, is licensed under CC BY-SA 4.0

6. Auxiliary Battery Depletion and BMS Charging Traps

A small electrical issue can quickly transform an overlanding adventure into a challenging recovery. The current-generation Ford Wildtrak trucks are reliant on auxiliary 12V battery to supply power to various electronically operated systems, and if the battery takes a quick hit to its charge, some of them can stop working. For example, many owners get a Vehicle in Battery Saver Mode warning message, 12V Battery State of Charge Low, etc. These warnings may come with other electronic and/or cabin accessory systems being unavailable, blind spots not available, and in some cases can cause engine restart issues, a real pain after sleeping in the woods overnight with no way to charge your truck.

Common Auxiliary Battery Warning Signs:

  • Battery Saver Mode warning appears
  • Low 12V battery charge message
  • Interior accessories become unavailable
  • 360-degree cameras stop functioning
  • Engine starting difficulties develop unexpectedly

This electrical issue may be due to a faulty factory AGM battery, or a poor calculation for the “onboard” Battery Management System to recharge. Keeping a compact 1000 A lithium jump pack in the centre console is a useful backup if the auxiliary battery runs out of charge. For owners of after-market DC-DC chargers, knowing how to do a BMS reset is also important. When battery circuits are changed, modified, spliced and they don’t do an official reset with FDRS, For Scan or other diagnostic tool then that can keep the charging system getting the wrong battery info.

Detailed view of a car battery being jump-started with cables in an engine bay.
Photo by Julia Avamotive on Pexels

7. Overland Load Constraints, Dynamic Roof Limits, and Dust Seals

A Wildtrak on long overnighters is, as previously mentioned, heavily laden. The wildtrak has progressive jounce rubbers in the rear leaf springs and this ensures that the overall weight capacity can be filled without the jouncy rubbers causing any undue degradation in the vehicles demeanor. Taking into account the weight of the driver, the bed can be used to carry over 500kgs of payload without adversely affecting the demeanor of the vehicle, but the vague steering inputs and excess bodyroll over rough terrain are noticed. There is another limiting factor, the roof (inc platform) also has a dynamic weight loading capacity of 80Kg.

Important Overlanding Setup Considerations:

  • Avoid excessive payload beyond limits
  • Monitor steering and vehicle stability
  • Respect the 80 kg roof rating
  • Seal gaps around the tailgate
  • Check accurate axle weight ratings

Dust intrusion into the cargo tub is also a common issue that can make extended trail trips miserable. Normal drainage gaps near the tailgate can pull lingering trail dust into the cargo tub for an incessant cleaning problem. A robust bulb seal on the tailgate gaps, a seal for the forward bed holes, and a forward-facing positive pressure vent can all help to minimize dust intrusion. Owners should confirm that the door pillar tyre and payload certification decals are displaying appropriate axle weight ratings by checking their vehicle identification numbers on recall 26V335000. This can help you be prepared for arduous overland loads.

John Faulkner is Road Test Editor at Clean Fleet Report. He has more than 30 years’ experience branding, launching and marketing automobiles. He has worked with General Motors (all Divisions), Chrysler (Dodge, Jeep, Eagle), Ford and Lincoln-Mercury, Honda, Mazda, Mitsubishi, Nissan and Toyota on consumer events and sales training programs. His interest in automobiles is broad and deep, beginning as a child riding in the back seat of his parent’s 1950 Studebaker. He is a journalist member of the Motor Press Guild and Western Automotive Journalists.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top