
BMW has announced the tech specs for the seventh generation M3 and it’s going to be an electric. Known as ZA0 the all-new super sedan has arrived on the Neue Klasse platform and BMW M has designed it to prove that electric power doesn’t need to be boring, even for serious track day aficionados. The initial stats are roughly 838 horsepower and 885 pound-feet of torque and a zero-to-100 km/h time of three seconds. But its top speed isn’t the only thing you’ll be racing.
And if you’re concerned about an electric future, there’s good news: BMW has now officially confirmed that a petrol M3, the G84 (and for those who understand the alphabet) will be available alongside the electric one. Though, the ZA0 remains the most powerful M3 ever made. In this blog, we are going to discuss its four-motor setup, the power distribution, battery, charging, Track mode, stiff chassis and software.

1. BMW Reveals the All-Electric M3 Blueprint
BMW has revealed the seventh-generation M3 a bonkers, all-electric super saloon that comes with a new powertrain configuration for Munich’s best super saloon. Known internally by its codename as ZA0, the new M3 is based on BMW’s new Neue Klasse platform previously developed to demonstrate that batteries can be thrilling for track focused drivers. Power figures are speculated at around 838 horsepower and 885 lb-ft of torque for the M3, which translates to a 0-100 km/h (0-62 mph) time of three seconds flat. But BMW says there’s more to it than just straight-line speed.
ZA0 at Glance:
- Seventh-generation M3, codename ZA0
- Built on Neue Klasse platform
- About 838 horsepower
- 885 pound-feet of torque
- 0–100 km/h in about three seconds
Fans worried about electric performance cars can breathe a sigh of relief. BMW has affirmed that the automaker will continue to offer a gas-powered M3 with the G84 code next to the battery-powered model. The pair will have the chance to co-exist in the showroom. However, even so, the electric ZA0 is the performance pointy end of the spear and the most potent M3 the division has ever designed, a risk for a badge with an illustrious legacy, and the engineering had to make it happen proves just how seriously BMW M was taking the job.

2. BMW M Joined the Neue Klasse Program Early
Instead of shoehorning electric motors into an established platform, BMW M developers entered the Neue Klasse program around 2020, months after the program began. That early start allowed the M performance division to build the fundamental structure around a track car’s structure, rather than adapt to engineering changes. Philipp Brunn, project manager for the Neue Klasse project and former vehicle concept lead for the G80-series M3, said “clean slate” thinking was necessary. “You can’t just sit back and then wait for those things to find your hand and then raise the hand and say ‘I want to make an M3,'” he said.
How the Project Began:
- M joined around 2020
- Joined months after development began
- Led by Philipp Brunn
- Tested two, three, four motors
- Settled on four-motor design
Starting at the very beginning allowed Brunn’s team to experiment. They explored rear-wheel drive and all-wheel drive, and considered configurations with two, three and four motors. In the end, BMW M selected a bespoke four-motor configuration for maximum agility, responsiveness and driveability in a wide range of conditions. And since Brunn’s team had a say right from the start, the motors, chassis and software could all be developed to support and complement each other, instead of being combined and assembled afterwards.

3. Inside the Four-Motor Hardware
The hardware is sensibly arranged. Two sport drive units reside on the chassis, one per axle. Inside each, two electric motors back-to-back in parallel sit rotated 180° to each other so the entire installation remains as tight as possible the motors pass their power through single-speed gearboxes directly to the wheels, without any mechanical differentials. The two motors in each capsule are connected to a common lubrication sump at the bottom of the casing while a 3-tier inverter sits on top to direct the electricity flow.
Drive Unit Highlights:
- One drive unit per axle
- Two motors side by side
- Motors turned 180 degrees
- Single-speed gearbox per motor
- Three-level inverter on top
The three-level inverter can be used to make motor control much more precise and the losses much lower, the high-voltage battery and charging expert Andreas Bentenrieder says. When used together with the individual drives, immediate, very granular torque vectoring becomes possible, the likes of which would make mechanical limited slip diff units seem like dinosaurs. Thanks to the individual drives on each wheel, the vehicle can control precisely how much torque is applied to each corner at every moment in time that was BMW M’s main reason for going with four of them, and pretty much every other aspect of how the vehicle drives is derived from that.

4. A Rear-Biased Power Split and a Smart Front Axle
On preliminary specs, the front axle will produce around 644 horsepower and 398 pound-feet of torque. The rear axle will produce about 751 horsepower and 738 pound-feet. Available to the driver is restricted to 838 horsepower intentionally holding additional torque at the each corner for control adjustments. By nearly doubling the torque to the rear wheels, BMW M maintains a rear-drive sensation, encouraging purposeful drifting on the track. Stefan Erler, head of user and customer experience, said this makes it easier to guide the nose into the turn rather than fighting odd pulling forces from the front drive axle.
Power Split Numbers:
- Front: 644 hp, 398 lb-ft
- Rear: 751 hp, 738 lb-ft
- Total output governed at 838 hp
- Nearly double torque at rear
- Front axle disconnects in Comfort
Real-world motorway range is boosted, with the help of an automatic decoupling unit, by disconnecting the front axle in Comfort mode. At that point the M3 drives as an efficient rear-wheel-drive car. However, the front motors re-engage for quick acceleration, snappy cornering and strong regenerative braking. It’s the best of both worlds: relaxing and frugal on the motorway but with the ability to put in a very different performance when the road heads up the mountain. That’s a clever solution to getting both economy and excitement from the same tech.

5. Four Motors for Control, Braking, and Safety
Choosing Sport or Sport Plus disables the front decoupling unit, so the M3 continues to operate with full-time all-wheel drive for instantaneous grip and precision. Brunn noted that competitors tend to go with a three-motor setup with one motor at the front, but four motors provide “the maximum amount of controllability and freedom.” Having the motors distribute the torque across four corners also benefits during braking as well, Brunn said, as the motors serve as blazingly fast anti-lock actuators. The friction brakes provide the baseline load to bring the car to a halt, while the motors provide tiny, rapid reversals that are far faster than a hydraulic anti-lock modulator can ever be.
Control and Safety Features:
- Sport modes lock in all-wheel drive
- Four motors give maximum controllability
- Motors act as anti-lock actuators
- Drivers can get on throttle earlier
- Faulty axle shuts down safely
This quick electrical action stops the dynamic stability control from choking off power, so drivers can get on the throttle very early when exiting a corner. If one motor has a mechanical or electrical fault, the car follows a strict failure mode and effects analysis protocol. Since there are no open differentials, driving just one wheel on an axle is mechanically impossible. The system therefore shuts down the whole affected axle, leaving the other two motors with “enough power to have a quick ride home,” according to Brunn.

6. A Battery Built for Track Abuse
Behind the passenger compartment: a sixth-generation high-voltage battery with around 100 kWh of gross energy. It’s got the same mounting points as the production-version Neue Klasse i3 sedan’s battery case, but it’s otherwise quite different. This battery uses BMW M’s cylindrical design-to-performance cells-metal sandwich-like plates coated with lithium cobalt oxide, using much thinner electrodes with significantly greater active surface areas, and containing more liquid electrolyte, enabling the exchange of ions to happen faster. These designs allow the battery to source long bursts of extremely high current without heating up.
Battery Facts:
- Sixth-generation high-voltage pack
- About 100 kWh gross capacity
- Case shares i3 mounting points
- Cylindrical design-to-performance cells
- Cooling doubled versus i3
Heat makes the difference between a conventional electric car and a true track car. To shed the 2.560 pounds (1.157kg) of weight, BMW M tripled the cooling hardware on the electric M3 over the i3. In the standard roadgoing vehicle, coolant jackets are on every other row of cells. The electric M3’s pack has cooling channels on both sides of all individual cell rows, meaning twice the transfer of heat. More powerful water pumps and larger coolant passages regulate the temperature on the fly on the track, while an M-specific Energy Master regulator controls the flow of electrons.

7. Fast Charging, Real-World Range, and Huge Regeneration
The charging numbers are very good. The M3 will accommodate a maximum of 420kW DC and, on a very powerful charger, will deliver a little over 217 miles of range in just 10 minutes. Total miles of range are estimated at close to 404 miles on the European WLTP cycle, although the EPA range for Americans should be somewhere around 300 miles. That should make the M3 a usable long-distance vehicle and fun to drive on occasions which is perfect for a car that will be used every day.
Charging and Range Numbers:
- Peak DC charging at 420 kW
- 217 miles added in 10 minutes
- About 404 miles WLTP
- Roughly 300 miles EPA
- Regeneration peaks at 540 kW
Total system energy recovery is a record-breaking 540 kW. And that sum is fueled by off-throttle regeneration plus heavy pedal-applied braking, which means collecting an immense amount of kinetic energy before it ends up in brake heat. This is significant both on the street and on the track because the more energy that gets recovered, the longer the range and the lower the burden on the friction brakes. As we’ll discover below, this high regeneration rate enabled BMW to reduce the size and weight of the friction brakes.

8. Track Mode Fights Thermal Derating
They developed a smart Track software preset that would keep this thermal derating the phenomenon that all electric-car drivers have experienced on a track day, where your pack gets hotter, but you’re unable to hold power at a high level. When you flip the car into Track mode, the thermal system knows the forecast and runs aggressive cooling until hot days of 77-95F, the pack preheats and warms to the right operating temperature. When the car is primed for the session, drivers can choose between a Hot Lap a two-minute demo, Short Run a quick eight-minute stint, or a Long Run 15 minutes.
Track Mode Details:
- Preconditions battery for weather
- Hot Lap lasts two minutes
- Short Run lasts eight minutes
- Long Run lasts 15 minutes
- Long Run needs 80 percent charge
The car checks its thermal reserves and state of charge, then works out a precise output curve that stays constant from green flag to checkered flag. “There’s no degradation,” Bentenrieder confirmed, which means consistent lap times without sudden drops in acceleration. A 15-minute Long Run needs at least 80 percent charge at pit-out. The strong regeneration helps too, recovering about 30 percent of the energy used on a circuit. In practical terms, three fast laps produce enough electricity to power a fourth.

9. A Stiff Chassis and Motorsport-Grade Suspension
Chassis stiffness was significant research at BMW’s Miramar proving ground in southern France, which offers 20 special tracks on a 1.8-square-mile campus. Damping and suspension movement are compromised by a flexible chassis under extreme cornering, Brunn said. To strengthen the structure, M BMW transformed the battery case into a structural shear plate that runs the length of the car. 8-millimeter-thick aluminum plates milled to connect the corner mounting points of the battery to the front and rear axle mounts; 2 pieces of aluminum add strength to the area where the subframe, body and battery connect; and welded-steel strut braces connect the front damper towers to the bottom of the front A-pillars.
Chassis and Suspension Highlights:
- Battery casing acts as shear plate
- Milled 8-millimeter aluminum plates
- Steel strut braces to A-pillars
- Five forged-aluminum rear links per corner
- Rear carrier bolted without rubber bushings
Robots add special pickup points to M3 shells on the factory line, so the heavy braces don’t add weight or cost to regular i3 bodies. This stiffness removed body shudder in testing and let engineers tune springs and dampers without chasing flex. The suspension is custom, not off-the-shelf. The front uses forged-aluminum swivel bearings, control arms, and tension struts with an aluminum-composite subframe. The rear has five forged-aluminum links per corner and cast-aluminum hubs. Torque steer was tamed with special steering geometry, an M-specific rack ratio, and software. Braking uses M Compound iron or optional M Carbon ceramic rotors, and thanks to 540-kW regeneration, the system weighs slightly less than the outgoing combustion M3’s.
10. The Heart of Joy, M eDrive, and the Road Ahead
The brains of all this is an in-house control unit known as the Heart of Joy. Modern cars use different computers to handle the powertrain, brakes, and stability system over data buses that take 10-20 milliseconds for each cycle. Heart of Joy fuses it all into a single master module running BMW M software called M Dynamic Performance Control, which operates in 1-millisecond loops and sees the four motors and the hydraulic calipers as intelligent actuators. It modulates torque at the inside wheels while adding torque to the loaded outside rear wheel during a turn. To entertain you on the drive, engineers devised M eDrive which breaks the car’s operating range into six stages and has an Agility meter in the head-up display.
Software and Cockpit Features:
- Heart of Joy master control unit
- One-millisecond processing loops
- M eDrive with six stages
- Auto S, Manual S, and D
- M1, M2, and M Setup buttons
Erler explained that electric motors deliver torque within one millisecond, while a V8 throttle can take up to 200 milliseconds. Raw response at 838 horsepower would cause violent bucking in traffic, but softening it too much would make a dull car. “We do not want to have a lame car,” he said, so the stages manage low-speed response while keeping peak thrust available. Drivers can pick Auto S, Manual S with paddle-held stages and shift lights, or standard D. Inside, the steering wheel has M1 and M2 buttons, an M Setup button, and an ADAS switch, with one tap showing toggles and a double tap switching off preselected interventions. The bucket seats use natural fiber composites and a patented cushion adjustment system. BMW hasn’t ruled out a rear-drive version, which would save weight but need bigger friction brakes.
