
It’s a delicate balance of brawn and maths to build a truck. For GM to get the 2027 Chevrolet Silverado 1500 on the road, the company went all-in on the numbers. Over 90,000 simulated crash tests completed top tier of development for GM’s next full-size truck before the first prototype was ever crushed 80% of the passive safety in the new full-size pickup completed by the time it was tested to the maximum in reality.
And that doesn’t mean the real crashes aren’t happening. GM still crashes a real truck into the barrier, since the computer has to prove out its answers with the real thing. In today’s blog, we show you how GM ended up from the 1930s to simulation today, what 2 petabytes of crash data really means, and what a 2027 Silverado double cab colliding with a barrier at 40 mph actually looks like. Plus, you can learn why GM made the rear seats out of space-grade aluminum, and what the truck’s active safety system will do to prevent a crash in the first place.

1. 92,000 Crashes Before a Single Prototype Is Wrecked
Once the prototype metal was destined for the scrap heap, GM chose to push the virtual computations for the 2027 Silverado 1500 to the limit. GM ran about 92,000 virtual crash tests of the truck to fine-tune the design. That’s a mind-boggling number, and to put it in perspective, each of those virtual crash tests was performed at no expense to a physical vehicle. Consequently, GM safety engineers did about 80 percent of the 1500’s passive safety development on the computer prior to using the physical crash lab for validation testing.
Simulation by the Numbers:
- Next-generation 2027 Silverado 1500
- About 92,000 virtual crashes
- Done before prototype scrapping
- Roughly 80 percent development finished
- Lab testing only for confirmation
Automotive engineering, by nature, is a compromise between simply smashing up objects with physics and fine calibration and topology work with complex structural math. GM’s leaning toward the equations for this early phase of design is quite logical. It’s time-consuming and expensive to crush an actual car to eliminate all the conceivable “what ifs,” as doing so at a workstation can be hundreds of times quicker. The goal isn’t to eliminate reality altogether but to come to the lab knowing what design features will need a physical crash test, and to have the physical test verify those designs and not reveal flaws.

2. From Outdoor Crashes in the 1930s to Digital Workstations
Occupant protection research is nothing new for GM. And, as pioneers of automotive crash testing, it goes back to the earliest days of GM’s own history. In the early 1930s, engineers went outdoors, and into the field, and tested vehicles directly crashing actual sheet metal into stationary objects to learn about how their vehicles performed when struck. It was rough and ready research, but it provided the insight on vehicle behavior that was the basis for what was to come.
How Testing Has Changed:
- GM pioneered crash testing early 1930s
- Early tests used real metal outdoors
- Computer-aided design arrived
- Computer-aided engineering followed
- Simulation platforms now lead
But in these days, things are radically different. Computer-aided design, computer-aided engineering, and modeling and simulation tools are transforming the way design engineers do their jobs. Now they can get away with demolishing a real vehicle only for larger issues and even then, only when the results warrant it. Instead of defining a question like “what if this bracket were a little thicker” as “build a new truck,” they define it as “change one number and run the model again.” This sort of thinking is what led to the 92,000 crashes.

3. Why a Full-Size Truck Needs So Many Simulations
Everything that makes a full-size pickup highly effective also creates a long list of variables that affect the protection of occupants. Trucks put in long hours with all types of loads on board. They also must be capable of accommodating drivers and passengers of varying sizes. Virtual testing allows engineers to evaluate hundreds of structural and restraint system variations, modifying things like the material thickness of structural parts, how those parts are fastened together, and even how the raw materials vary in strength between what the supplier guarantees and what the manufacturing plant produces.
What Engineers Can Tweak:
- Material thickness in structural members
- How components connect together
- Natural variation in raw materials
- Manufacturing line differences
- Restraint system variations
That matters because there are thousands of tiny parts that go into making a truck, and a small change to any one can impact how crash forces make their way through the cabin. Something that doesn’t seem significant on paper might cause a load path to shift in an unanticipated direction. With the extraordinary number of crash simulations being done, engineers are more likely to discover those impact-path issues early on, and in turn address them before they become costly design fixes that could affect real people.

4. “Iterate in Weeks Rather Than Months”
Here’s why she says that’s so powerful, in her words: “GM is using math-based virtual engineering to play out thousands of simulated crash tests before any physical properties are even available. This means that engineers can begin probing ideas before a single bit of tooling or part is made. While this takes a lot less time and lets engineers explore many more facets than actual physical testing, it also comes with a huge benefit.”
Carto’s Key Points:
- Math-based virtual engineering
- Thousands of simulated crashes
- No physical parts needed first
- Different crash modes tested
- Iteration takes weeks, not months
She later explained what that flexibility would mean. “Engineers can consider a much wider array of scenarios all kinds of crash conditions, occupant types, seating positions. They can analyze minute design variations, get ahead of problems, and iterate within days rather than weeks.” But this final difference is the most significant. Problems found early are always better than problems found late. Problems caught in a simulation can be debugged and tested in days, while the time to fix it after prototypes are made can add months of work and cost even more.

5. Why Real-World Testing Still Matters
But no matter how powerful simulation is, nothing replaces going to the test floor. Top-caliber math models have not done away with reality checks; they’ve honed the questions engineers ask when actual metal encounters an unyielding wall. The physical test can be viewed as the final exam. It definitively proves-or disproves-what would have been the expected outcome of thousands of computer runs. When they all agree, the engineering baseline is established. When they don’t, the real-world data is fed back into the models so the next set of simulations is more precise.
Digital Meets Physical:
- Physical tests confirm predictions
- Matching results prove baseline
- Mismatches improve the models
- Tests become more targeted
- Real-world fidelity improves
Carto explained how the relationship between these two different tools played out. “Virtual engineering makes our physical testing more focused, more efficient and more meaningful,” she said. “Our virtual models open up a lot more design options, allow us to zero in on the most promising designs, then do our physical testing to validate what we’ve learned and improve our models further. Both technologies combined give us as much “early in the process” feedback as possible, and with increased fidelity to how the products will perform in the real-world environments in which our customers operate.”

6. Nearly 2 Petabytes of Data and a Helping Hand From AI
Because that’s lots of data. GM estimates the virtual safety program for the 2027 Silverado 1500 was built off of nearly 2 petabytes worth of digital data approximately 2.1 million gigabytes, or one trillion pages of text in digital form. Once you start putting a number to it, it’s pretty crazy to imagine that much data. It would take a lot of servers to manage it and it certainly wouldn’t be humanly possible to sort.
Data and AI Highlights:
- Nearly 2 petabytes generated
- About 2.1 million gigabytes
- Roughly one trillion printed pages
- AI combs data for anomalies
- Goal: halve development time
That’s where artificial intelligence comes in. Engineers use AI to comb through the datasets, spot anomalies, and troubleshoot simulation models. It takes over the repetitive chores that would otherwise eat up thousands of engineering hours. That frees safety teams to look at fine structural details and test more design ideas earlier. It also fits a bigger GM goal. The company wants to cut vehicle development time roughly in half, down from the traditional industry standard of four to five years to a much tighter schedule.

7. Inside the 40-mph Offset Crash at Milford
While the digital leads the early phases of development, the physical crash test is where the safety proof points are established. GM staged a double-cab validation testing on the 2027 Silverado for the media at the historic Milford Proving Ground just outside Detroit, Michigan. Milford has hosted vehicle safety and crash testing since 1966. Originally an outdoor impact range, the testing area now encompasses an indoor facility designed to eliminate competing elements, such as sunlight, snow and rain.
The Test Setup:
- Held at Milford Proving Ground
- Testing there since 1966
- 40-mph frontal offset barrier crash
- 40 percent of front width hit
- Driver’s side into deformable barrier
The test was one of the toughest frontal scenarios there is: a 40-mph frontal offset deformable barrier crash. The truck hit a stationary barrier with 40 percent of its front width on the driver’s side. This copies a common real-world crash, like clipping an oncoming vehicle or an off-center roadside hazard. Because the energy is concentrated on less than half of the front, it puts huge demands on the frame rails, bumper parts, and passenger cabin. It’s a hard test on purpose, because easy tests don’t teach engineers much.

8. The Million-Dollar Dummies Inside the Cab
The truck was not empty. Two special crash-test dummies filled it. In the front seat sat a dummy that modeled an average-sized adult man (the 50th-percentile male). Sitting just behind the driver, in the second row, was another dummy that modeled an average-sized adult woman (the 5th-percentile adult female). Using dummies that model different body sizes in both rows allows engineers to assess protection throughout the cabin not just for the person in front.
Dummy and Data Facts:
- 50th-percentile adult male driver
- 5th-percentile adult female behind
- Each dummy exceeds $1 million
- About 50 telemetry channels each
- Cameras shoot 1,000 frames per second
These dummies are not cheap. Each one in GM’s Anthropomorphic Test Device Laboratory is worth more than $1 million. They’re packed with sensors, and a single dummy records about 50 channels of data during a crash, including peak forces, acceleration, and deflection. To see how people would touch the airbags, technicians put colored grease on the dummies’ contact points, which leaves visible marks where skin would meet an airbag. High-speed cameras running at 1,000 frames per second capture the crash millisecond by millisecond.

9. What Happened When the Silverado Hit the Barrier
When the 2027 Silverado double cab struck the barrier at 40 mph, the body structure responded as it should. The driver’s side front deformed sequentially and absorbed the majority of crash energy. Even more critical, the strong steel safety cage surrounding the occupant cell maintained its integrity, allowing examiners to walk around and open the exterior door handles the openings around the doors hadn’t collapsed closed, a feature that in real life would allow someone to escape or be helped out of the vehicle quickly.
Post-Crash Results:
- Front structure collapsed progressively
- Safety cage kept its shape
- Exterior door handles still worked
- Hazard lights and horn activated
- All doors unlocked automatically
If one of its objectives, the truck’s automatic emergency response was successful. Its hazard flashers, interior courtesy lamps, horn and door locks activated by themselves. Engineers also inspected the automated OnStar emergency call system and verified there was no fuel-system leak. Brian Curry, GM senior safety performance integration team leader for light-duty pickups, led the posttest inspection and noted that the cabin held its structure, providing front and rear seat riders with critical survivable space. But that is only the beginning. Preparing one test vehicle takes about two weeks, with a week to tear it down, so a single crash in a matter of a second takes as long as four to five weeks of work.

10. Fixing the Double Cab and Adding Active Safety
Chevy starts the 2027 truck rollout with the crew cab, and the double cab has to wait until next year’s second half. The previous 2026 Silverado 1500 got a four-star (out of five) overall rating from NHTSA’s New Car Assessment Program, but the Insurance Institute for Highway Safety gave the existing double cab a marginal score on its offset deformable barrier test, which simulates a frontal crash. The shorter rear section of the double cab creates a tighter space for back-seat passengers and makes them experience different accelerations than the crew cab passengers in a frontal crash.
Safety Upgrades Made:
- Rear-seat belt pretensioners added
- Rear seat structure redesigned
- Cross-traffic automatic emergency braking
- Expanded blind-spot monitoring
- More than 20 active features
Seeking to improve, GM added rear-seat belt pretensioners and redesigned the seat structure underneath, said Curry. Safety standards are continually evolving and don’t always align with a truck’s birth date, so mid-cycle changes give engineers a chance to get ahead of future regulations, he said. GM also focused on prevention. The truck has more than 20 active safety and driver-assistance features including intersection cross-traffic alert with automatic emergency braking and blind-spot monitoring that extends the length of a hitched trailer, said Clifton Pinion, GM senior manager, vehicle safety and crashworthiness labs and Pontiac propulsion labs. GM timed its test to follow closely IIHS testing protocol but wouldn’t venture a projection of the test result.