
The recall involves the fuel line connection that could be loose near the tank and cause petrol to leak out under the vehicle. In the presence of a spark or another source of ignition, this fuel can ignite and cause a fire. The recall is identified as NHTSA campaign number 26V673. The recall involves the current generation of the Land Cruiser, which is known as the J250 Land Cruiser. If you own a Land Cruiser or are considering purchasing one, then you should take this recall seriously and have the vehicle inspected.
This was the second such recent recall, after the car returned to the US market earlier this spring, and the most recent problem has caused concern among owners of the truck. According to Toyota, the company will check the connections of the fuel and applies the additional clamp for free. If you own one of the trucks, you are advised to verify the vehicle identification number to confirm if it falls into the recall category, and also schedule an appointment for an inspection. Better safe than sorry when it comes to a possible fuel leak.

1. Toyota Recalls More Than 105,000 Land Cruiser Hybrids
This round of recalls impacts 105,794 units of the Toyota Land Cruiser Hybrid SUV for 2024, 2025, 2026 and 2027. The Land Cruiser models in question are the J250 generation, which was reintroduced to the US in the spring of 2024. The dates of manufacture included in the campaign span from November 29, 2023, to October 1, 2026; but Toyota said not all models manufactured in those days were released in the US.
Key Recall Details:
- 105,794 US vehicles affected
- 2024-2027 model years covered
- J250-generation Land Cruiser SUVs
- Production dates span nearly three years
- Canadian campaign covers 6,721 vehicles
Despite the large recall number, it does not indicate that every vehicle within the production interval suffers from the flaw. Toyota’s investigation discovered that the fuel connection is likely to disconnect in some conditions when the retainer clip is raised. The automaker will examine the models which are involved and add a clamp to keep the connection properly secured. Owners should verify a recall before scheduling repair.

2. A Fuel Tube Connection Could Come Loose
The issue is the two fuel lines near the petrol tank of the Land Cruiser. A moulded resin fuel tube is fastened to the tank, and a metal tube feeds the fuel towards the turbocharged four-cylinder engine. A retaining clip is put into place to lock the two elements together. “Lifting the clip allows the fuel lines to separate,” Toyota explains, “which may cause petrol to leak from the system. The fuel will continue to leak while the hybrid system’s combustion engine is running, in a manner that could pose a risk of fire to the vehicle.”
How the Fuel Connection Works:
- Resin tube connects to tank
- Metal tube carries fuel forward
- Retaining clip secures both lines
- Lifted clip can loosen connection
- Separated lines may leak petrol
What makes the fault even more alarming is that the fuel connection is one of those located on an engine feeding system. The joint can have the effect of using up petrol but also – crucially it may cause a combustion engine to stall. The source of the petrol leak, at least when one occurs, also poses an extreme fire risk when petrol is close to an ignition source. Japanese suppliers of the component parts of the connection are Usui Co., Ltd. And FTS Co., Ltd. and Toyota said that no other of their models employs this particular connection part.

3. Toyota’s Investigation Began in July 2024
Toyota began looking into the issue in mid-July 2024 following early reports of fuel leaks. Service technicians working on the cars identified retaining clips that had been dislodged or had popped out of place. The leaks were fixed at first by re-installing the fuel connectors and replacing the resin fuel tubes. But company investigators subsequently examined manufacturing records and footage taken by security cameras following the assembly line that showed the clips had been properly installed before the vehicles left the factory, which would mean the clips moved after cars left the factory.
Early Investigation Findings:
- First reports appeared in July 2024
- Some clips were lifted
- Others were missing completely
- Dealers reseated or replaced components
- Factory footage showed correct assembly
Toyoyta has also tested production records and samples of parts received from its component suppliers. These led to the confirmation that the parts contained were dimensionally correct. An assembly plant added more visual and tactile inspections as a safety measure. The suppliers have since tested two resin fuel tubes imported from overseas markets, which were also successfully tested for air-tightness and pressure-resistance, with the surface markings indicating the joint was separated, again, with the locking ring pulled apart or by a tool.

4. Testing Found No Clear Manufacturing or Design Fault
From May through August 2025, Toyota looked at more components retrieved from the American market that were similar to the ones used in the recalled vehicles. They passed dimension checks and pressure-resistance tests, and markings were similar to tubes that had been separated when the retaining clip was removed, leading to the possibility that the connection may have been disturbed after leaving the factory.
Results From Toyota’s Initial Tests:
- Recovered parts met dimensional specifications
- Pressure tests showed no failure
- 200 inspected vehicles had secure connections
- Locked joints resisted pulling forces
- Vibration tests caused no separation
The assemblies stayed mated in the longitudinal pull tests, which proved that the assembly held until the connector housing failed. The joints survived vibration at their resonant frequency and fluid pressure beyond the fuel pump’s maximum capacity. Test results further demonstrated that driving through high levels of standing water at different speeds, connectors did not separate when their retaining clips were properly engaged.

5. Further Testing Examined Heat, Pressure and Driving Conditions
The company then ruled out other factors, such as the high temperatures around the car. Engineers checked the temperature of areas of the chassis and determined that they would not have reached the auto-ignition point of petrol by themselves. This was related to how the fuel lines had separated when the retaining clips were lifted. At the time of the report, which was written for overseas regulators, it was still unknown what would cause a retaining clip to lift up after a vehicle had been manufactured.
What the Additional Checks Revealed:
- Nearby components stayed below ignition temperature
- Locked connectors remained secure
- Water exposure caused no separation
- Testing found no design flaw
- Cause of lifted clips remained unclear
From May to September 2026, Toyota examined additional transmissions from newer production dates. Through closed-course testing, the engineers evaluated how the SUV would behave should the fuel pump instantaneously fail while the vehicle was in motion. When they switched off the pump, warning lights illuminated and the combustion engine immediately turned off. The vehicle transitioned into its all-electric EV drive mode but with a reduced drive power until the high-voltage battery had been exhausted.
6. Later Tests Confirmed the Potential Fuel Leak Risk
Quality engineers tested whether external pressures could dislodge a properly secured retaining clip. They applied compressed-air blast testing and industrial pressure washers, but neither effort was enough to cause a correctly seated clip to lose its hold. A further inspection covered 400 customer vehicles. Just one Land Cruiser in the group had a fuel line clip that had moved, but the fuel lines were still attached, and the vehicle had not leaked. Static spray testing confirmed that gasoline leaks did not run into ignition sources or accumulate on nearby parts.
Findings From the Later Tests:
- Pressure washers did not dislodge clips
- Only one lifted clip among 400 vehicles
- No leak occurred in that vehicle
- Spray tests found no ignition contact
- Disconnected lines released multiple gallons
The potential for fuel to escape altered Toyota’s risk equation. Despite the fact that engineers never figured out exactly how some clips had become detached, the thought of a handful of gallons spilling out of a running fuel pump was too much. Toyota ordered a voluntary safety recall on October 8, 2026. The company’s internal files showed 23 Toyota Field Technical Reports, in addition to 64 domestic warranty claims, on the problem. It reported an estimated defect rate of 1 per cent to the federal government though that may not have been the real rate of failure.

7. Toyota’s Recall Repair Includes an Additional Clamp
What Toyota is doing Toyota will check the fuel tube connection and install an extra clamp. The recall service will be performed at no cost to customers at authorised Toyota dealerships. The extra clamp is designed to prevent the resin and metal fuel tubes from disconnecting even if the original retaining clip has become dislodged. If technicians discover damage, the resin fuel tube will be replaced prior to installation of the extra clamp.
What the Recall Repair Involves:
- Free inspection at Toyota dealerships
- Fuel tube connection checked
- Supplementary clamp installed
- Damaged resin tube replaced
- Repair covered by Toyota
The additional clamp offers a mechanical safety feature at the connection point – preventing the two fuel lines from disconnecting. Toyota has not recommended that owners attempt this repair themselves. The inspection and re-installation must be performed by an authorised dealership technician owners are encouraged to schedule the work as soon as the vehicle has been identified as part of the campaign, due to the potential fire hazard of the defect.

8. Owner Notifications and VIN Checks
Official recall notices will be mailed between November 29 and December 13, 2026. The recall campaign is identified as 26TB23 and 26TA23. Vehicles do not need to be at risk in order to use the NHTSA recall lookup to verify if the Land Cruiser was part of the campaign. The 17-digit VIN can be entered into the lookup to find out, or owners can call Toyota on 1-800-331-4331 and speak with the customer service team. The recall search is particularly important because the campaign is spread over a five-month production period, and not all models built within those months will have been sold in the US.
How Owners Can Check the Recall:
- Look up the 17-character VIN
- Use the NHTSA recall tool
- Check Toyota’s campaign information
- Call Toyota on 1-800-331-4331
- Arrange an authorised dealer inspection
The advice is that owners should also be alert for other common indicators of a petrol leak. Look out for a strong petrol odour around the rear of the SUV, a suspicious fluid leak from beneath the vehicle or increased fuel consumption. If any of those symptoms are present, owners are advised to take additional safety steps it is recommended to move the vehicle outside and away from buildings until the inspection process has been completed, as the last thing you want is for leaking fuel vapour to ignite and cause a fire.

9. The Recall May Have Consumer Protection Implications
However, a defective vehicle that leaks petrol and has the potential for a fire may have more consequences than simply not needing a repair. Consumer protection law may give owners more remedies in cases where there are multiple repair attempts that do not resolve the defect covered by the warranty. Consumers in California, for example, are protected under the Song-Beverly Consumer Warranty Act if their vehicle develops a specific defect that cannot be repaired after two repair attempts, or is out of commission for 30 days or more while being repaired.
Why Keeping Repair Records Matters:
- Record every dealership visit
- Keep copies of repair orders
- Note vehicle mileage and dates
- Document repeated fuel system problems
- Check applicable consumer protection laws
Owners with a history of repeated fuel system issues should maintain records of each inspection and repair. Such records can help determine what repairs were tried, and how many days the vehicle was out of commission and whether the defect was experienced multiple times. When the shop does not resolve the problem after multiple attempts, these records may help with consumer protection advice.

10. Toyota’s Wider Line-up and Other Safety Recalls
The Land Cruiser campaign is just the latest Toyota safety recall after a handful of others that involved various categories of vehicles. The automaker already has recalled the RAV4 plug-in hybrid as well as to tackling an engine problem that involves debris in the Tundra. Land cruisers aren’t the only type of Toyota vehicle that have been recalled, there also have been interior-related recalls such as Highlander seat recall involving 2021 to 2025 models.
Toyota Models Across the Line-up:
- Corolla Cross compact crossover
- RAV4 practical family SUV
- Highlander three-row family vehicle
- Sienna spacious passenger minivan
- Tacoma and Tundra pickup trucks
Passenger and cargo space Sienna handles well, with spacious passenger and luggage space that makes it ideal for more leisurely family adventures. Alongside the Corolla, one of the most popular value cars in the world, the range includes the larger and more stylish Camry and the Prius, with a 57/56 mpg city/highway figure from EPA. Drivers who want to go faster can opt for the Supra, with a 3.0-litre turbocharged inline-six and a 3.7 0-60 mph time, and the Tacoma, which can tow up to 6,800 pounds when properly fitted.
