Your Car Suddenly Accelerates on Its Own? Here’s How to Stop It Safely

AutosLeave a Comment on Your Car Suddenly Accelerates on Its Own? Here’s How to Stop It Safely

Your Car Suddenly Accelerates on Its Own? Here’s How to Stop It Safely

Close-up of a car interior with driver's hand on steering wheel in Delhi, India.
Photo by Dev Raj on Pexels

“Sudden Unintended Acceleration” can turn an ordinary drive into a dangerous situation in seconds. Today’s cars have electronic throttle controls, physical accelerator pedals and sophisticated integrated software which in rare instances, can fail. A pedal that gets stuck, an object blocking the accelerator, or electrical failure that causes sudden acceleration, can launch a vehicle forward unexpectedly. If it happens at speed, understanding how to operate your vehicle’s controls can let you bring the car to a controlled stop.

Vehicles are equipped with multiple mechanical and electronic systems to help you to control excessive engine power and regain control of the vehicle. The way in which you operate the brakes, the transaxle and engine controls in a specific order can make all the difference, as opposed to panicking while trying to desperately take immediate action.

1. Lift the Accelerator Pedal Using Your Toe

Sudden acceleration sometimes occurs when an object is mechanically obstructing the accelerator pedal. If it is safe to do so, try lifting up on the accelerator pedal with the toe of your right foot. If you have a loose item or your floor mat covering the pedal, this action might free the pedal and your engine will speed up. Repeat until pedal is free to and the engine speeds up.

What to Remember:

  • Check for a trapped accelerator
  • Lift gently with right toe
  • Keep both hands on steering
  • Keep right foot ready to brake
  • Continue if engine speed remains high

Keep both hands safely on the wheel while examining the pedal. If your right foot is comfortably poised to move onto the brake pedal if the accelerator pedal fails to release, then a quick jabbing of the pedal to try to dislodge the obstruction may be your best option, but if that doesn’t work and the engine remains at high revs, the problem might be with the electronic throttle system or any of a number of other mechanical issues don’t keep stabbing at it, try the brake and the transmission controls instead.

Close-up photograph of Go and Stop pedals in a vehicle, highlighting texture.
Photo by Mikhail Nilov on Pexels

2. Apply Firm and Continuous Brake Pressure

Your car’s conventional braking system is used to decelerate and finally halt the automobile, even when the engine’s pushing all sorts of big energy. We have also proven through controlled automobile testing that by exerting heavy, sustained braking force we can stop a vehicle going full throttle from highway speeds. Hydraulic brakes exert substantial stopping force through the calipers and brake discs, counteracting the engine’s forward thrust.

The Right Braking Technique:

  • Press the brake firmly
  • Maintain continuous pedal pressure
  • Avoid repeatedly pumping the brakes
  • Allow the vehicle to slow
  • Keep steering under control

Use the brakes by pressing firmly on the pedal with your right foot but avoid pumping the brakes. Pumping consumes the vacuum assist, so the pedal becomes harder to push, and less vacuum remains in reserve to help braking. Keeping the same pressure to the pedal ensures the vacuum remains there to help provide brake force as the car slows. What you want to do is slow down and get the car under control without overreacting.

Detailed close-up of a modern car's gear shift indicator showcasing technology and design.
Photo by Victoria Ouarets on Pexels

3. Shift the Transmission into Neutral

One of the easiest methods of de-coupling the engine’s power from the driven wheels in a scenario of sudden, unintended acceleration is to put the transmission into neutral. If the car is automatic, shift the gear selector from Drive to the N position. If it’s manual, step on the clutch. Either version of neutral puts the engine in a state where it is no longer driving the wheels.

How to Disconnect Engine Power

  • Automatic: select neutral
  • Manual: press the clutch pedal
  • Separate engine power from wheels
  • Expect engine revs to rise
  • Use brakes to slow down

If the switch is put into the neutral position, the engine will spin up to a much higher speed as it is disconnected from the resistance of the wheels turning. That can be pretty loud, but the engine’s internal rev limiter should keep it from over-revving. What is critical is now that the machine is free to coast with the engine running, its normal brakes will have braking power and the engine won’t be helping to accelerate it. The automatic transmission has a protect system to prevent damage from abrupt moves of the selector lever in flight.

Close-up image of a car's engine start stop button on the dashboard.
Photo by Vladimir Srajber on Pexels

4. Hold the Push-Button Engine Start/Stop Switch

On if the accelerator pedal is stuck and you cannot break the speed by applying the brake, you may turn off the engine that shuts off the power mode that increases the speed by holding the start/stop switch for at least 3 seconds. Newer models equipped with a keyless ignition system may ignore a brief moment of pushing the switch to turn off the engine when you are driving.

Important Engine Shutdown Points:

  • Locate the start/stop button beforehand
  • Brief presses may be ignored
  • Hold continuously when required
  • Steering may become much heavier
  • Brake pedal may need extra force

Turn the Engine Off A de-powered vehicle doesn’t have the same easy steering control, after the engine has been switched off, you may find that the power assistance to the steering is lost, making the steering wheel considerably stiffer. The power assistance to the brakes may also be lost, requiring additional force to be applied to the brake pedal. For these reasons, turning the engine off is generally considered a last resort after de-selecting the gears.

Close-up of a car's gearshift and handbrake highlighting the modern vehicle interior.
Photo by Safi Erneste on Pexels

5. Avoid Using the Parking Brake as Your First Response

You instinctively grab at the parking or emergency brake If your car suddenly gains speed, you might instinctively reach for the parking or emergency brake. Those systems are meant to keep the car stationary, not slow a car traveling at high speeds. When you pull on it during a throttle runaway, you can cause other issues, especially if the back wheels lose grip or the brake system is unable to cope.

Why the Parking Brake Is Risky:

  • Designed mainly to hold parked vehicles
  • Sudden application can affect balance
  • Rear wheels may lose traction
  • Vehicle control may become difficult
  • Prioritise the normal brake pedal

Suddenly jamming on the brake with the rear wheels as the car is still trying to propel forward may lead to the car swinging from the forces of the lockup. The car may become uncontrollable and steering can be difficult. Standard foot operated (hydraulic) brakes should be used as the main brake for the vehicle and the parking brake should not be used as an ordinary substitute but only in a critical emergency (such as the failure of the main brake system). Follow instructions from the vehicle manufacturer.

Rear view of a sleek vehicle on a dimly lit urban street, capturing the essence of night-life driving.
Photo by Sherman Trotz on Pexels

6. Switch on Hazard Lights and Find a Safe Exit

When you’re driving and accelerating with no obvious reason, there is a risk of other road users not knowing that something isn’t quite right. Putting on your hazard warning lights signals to drivers around you that they need to give you some space in case you stop suddenly. You’ll find the hazard switch on the dashboard with a triangle icon.

Steps to Secure a Safe Stop:

  • Activate the hazard warning lights
  • Check mirrors and surrounding traffic
  • Look for a safe stopping area
  • Avoid sudden steering movements
  • Arrange professional inspection and towing

As soon as the warning lights show, check the mirrors to see the traffic around you and try and find a safe place to stop. A breakdown lane, a service area or an open car park can give you an ideal location to stop. Try not to suddenly turn the steering wheel, but instead focus on keeping the steering wheel steady, and gradually slow down. Once stopped, turn off the engine and call a professional to take the vehicle away and make sure the problem is fixed before you resume driving.

Close-up view of a mechanic diagnosing a Volkswagen engine with specialized equipment.
Photo by Daniel Andraski on Pexels

7. Understand Your Car’s Electronic Throttle-Override System

Today’s electronic throttle systems can read the Accelerator pedal position electronically and have a computer program that can decode the accelerator pedal signals. It may also be possible for the manufacturer to include protective code inside the engine control computer. The engine computers in the cars manufactured by BMW, Chrysler, Nissan, Infiniti, Porsche and Volkswagen are known to have smart throttle-override capabilities that can limit engine power when the brake pedal is applied.

How Electronic Override Helps:

  • Electronic throttle replaces direct linkage
  • Software monitors brake pedal input
  • Brake application can reduce engine power
  • Several major brands use override systems
  • Exact operation varies between vehicles

In a demonstration during track test, vehicles using such a system were able to show that the electronic control measures could handle simultaneous application of accelerator and brakes. The stopping distance difference between open-throttle and closed-throttle conditions was stated to be less than 10 feet in the test we read about. It illustrates how the car’s computer can get the brakes to take over again when the pedal is down in some vehicles. Note, however, that it varies per vehicle, so learn to know your car rather than assuming every system is the same.

Close-up of Renault Clio car interior showcasing a customized floor mat with branding.
Photo by Mike Bird on Pexels

8. Keep Floor Mats and Footwell Areas Clear

If a floor mat is not attached securely or properly, it can pose a serious danger if it slides under the gas pedal. National transportation safety agencies have investigated incidents of unintended acceleration caused by unsuitable or unfastened mats, resulting in millions of recalled vehicles. Mats that have been removed during cleaning and remounted may slip forward and pin the gas pedal in the depressed position.

Keep the Driver’s Footwell Safe:

  • Use compatible vehicle floor mats
  • Secure mats with retaining clips
  • Remove loose objects from footwell
  • Check around accelerator pedal
  • Prevent anything obstructing pedal movement

Loose items can cause an issue too. Drinks cans, coffee cups, bottles of water and even chunks of snow packed in footwear as you get in to the car may end up around the pedal assembly. This blockage can make the pedal hard to press and even harder to clear when you need to get on the gas. Use floor mats that are designed to fit and secure them with the factory retaining clips and give everything a shove to make sure the cabin’s interior conditions don’t snowball into a major driving event.

Martin Banks is the managing editor at Modded and a regular contributor to sites like the National Motorists Association, Survivopedia, Family Handyman and Industry Today. Whether it’s an in-depth article about aftermarket options for EVs or a step-by-step guide to surviving an animal bite in the wilderness, there are few subjects that Martin hasn’t covered.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top