
Toyota launched the return of the legendary Land Cruiser to American dealerships in spring 2024 and made headlines with its retro appearance, off-road capabilities and optional turbocharged i-FORCE MAX hybrid powertrain. Toyota is now launching a large-volume, voluntary safety recall of 105,794 Land Cruiser Hybrid SUVs model-years 2024-27. Under the National Highway Traffic Safety Administration campaign number 26V673, the recall involves a fuel-line connection that may disconnect near the tank and cause a fuel leak.
Affecting 138,600 cars within the U.S., which have been constructed from Nov. 29, 2023, to October 1, 2026, with internal campaign names 26TB23 (for Tacoma) and 26TA23 (Tacoma), the defect is a retaining clip that can pop out of the locked place, dislodging the resin fuel tube from a steel pipe, releasing gasoline underneath the vehicle and creating a fireplace hazard if an ignition supply is close by. Toyota will supply a free repair of the connection, together with an extra protecting clamp.

1. Toyota’s Recall Covers Nearly 106,000 Land Cruiser Hybrids
The newest Land Cruiser safety recall by Toyota involves 105,794 Land Cruiser hybrid SUVs from 2024, 2025, 2026 and 2027 model years. The recall is registered with the National Highway Traffic Safety Administration as campaign number 26V673 and Toyota has its own internal campaign numbers of 26TB23 and 26TA23. Each of the vehicles covered was built from November 29, 2023, to October 1, 2026 at Toyota’s plant in Japan before arriving in North American dealerships.
Recall Overview:
- 105,794 SUVs included
- 2024-2027 model years
- NHTSA campaign 26V673
- Toyota campaigns 26TB23 and 26TA23
- Japanese-assembled vehicles covered
Despite the length of the run, Toyota says not all vehicles in the run were sold here. The recall covers the re-designed hybrid Land Cruiser, which is not all vehicles bearing that nameplate. Of the nearly 106,000 SUVs in the recall, Toyota dealers will have to examine the VINs of each of the SUVs involved in the campaign and carry out the repairs. Owners should check their own VIN, not all SUVs from those years.

2. The Fuel Line Connection Behind the Safety Concern
Here’s the rub, it is a molded resin fuel tube attached directly to the Land Cruiser’s fuel tank. The tubing is a thermoplastic found in most automotive applications, which leads to a metal fuel pipe that carries the fuel toward the engine compartment. Those pieces are joined by a quick-connect fitting (another typical automotive connection). An internal snap ring should slip over a raised ring on the tube to “snug” and seal the joint.
Fuel System Components:
- Molded resin fuel tube
- Metal fuel delivery pipe
- Quick-connect coupling
- Internal retaining clip
- Raised locking ring
All hell could break loose if the retaining clip pops out or gets lifted out of its lock position. Under the constant input of forces and movements by the car, the resin tube and metal pipe could eventually become disconnected. This one is on the gasoline supply side of the system, so the electric fuel pump will empty gallons of gasoline on the underside of the SUV until the hybrid kills the gasoline engine.

3. Which Land Cruiser Models and Trims Are Affected?
Toyota offers only a hybrid version of the redesigned American-market Land Cruiser called i-FORCE MAX. It uses a turbocharged 2.4-liter four-cylinder gasoline engine and a 48-hp electric motor attached to the front of an eight-speed automatic transmission. Since there isn’t yet a gasoline option of the all-new Land Cruiser without a hybrid offered in the United States, the recall affects all model grades equipped with the current hybrid powertrain.
Affected Vehicle Details:
- 2.4-liter turbocharged engine
- 48-horsepower electric motor
- Eight-speed automatic transmission
- Hybrid-only American lineup
- 1958 and higher trims included
Therefore, a campaign is the base 1958 model plus fully equipped SUV models. Also, the campaign includes four different model years encompassing the period of time that Toyota vehicle recall documentation covers. The hybrid powertrain in common explains why the campaign is not associated with the equipment package included in whatever name or feature content the SUV has, owners just need to check the VIN or recall status of their vehicle.

4. How Toyota Discovered the Fuel Line Problem
Toyota began investigating the source of the fire in mid-July 2024 after dealership technicians discovered notches or separated retaining clips while servicing customer vehicles. Engineers investigated production processes at the factory Japanese plants, the data recorded by the inspection of parts, the instructions to mechanics, and the security videos from the vehicles related to the reported fuel leaks. Clips were properly installed and fully seated in their holes in the factory videos before leaving the assembly plant.
Investigation Timeline and Findings:
- Initial reports in July 2024
- Dealer inspections identified loose clips
- Factory assembly footage reviewed
- Production records examined thoroughly
- Correct installation seen in footage
The company tested the fuel link with its components providers as well. It received the molded resin fuel tube from FTS Co. Of Japan and the metal tube from Usui Co. Both companies sent in production sampling data and maintained their pieces met dimensional specs. The plastic tubes from two depositions, returned to the plant, failed high-pressure tests and were able to hold an airtight seal. Microscopic examinations show that test connectors had been pulled apart.

5. Component Testing Reveals Evidence of Unlocked Connections
Toyota discovered other distinct marking patterns on certain of the fuel-line parts they recovered, such as a foreign connector. The foreign connector, for instance, had a mark indicating that a hand tool had been used to disconnect it after the vehicle left the factory; other parts had tear abrasions found on test couplings when their lock clips were depressed. Such markings on parts taken from American vehicles found during the same time period.
Important Investigation Findings:
- Tool marks on connectors
- Evidence of forced separation
- Unlocked clip stress abrasions
- Components passed pressure testing
- Factory dimensions remained compliant
Despite these markings, the resin tubes obtained from the accident scene by Toyotas were consistent with the dimensions in their original manufacture and did not burst in pressure tests in the lab. Toyotas review found that the rupture did not demonstrate a defect in the tube material itself. The physical evidence, from the markings in the tubes and the reason for the tube ends, indicated that the tube may have come loose when the retainer clips were not in use.

6. Toyota’s Extensive Testing Found Properly Locked Clips Remained Secure
Toyota analyzed around 200 customers vehicles produced in different locations and production timeframes to determine if differences in mileage or assembly location caused the clips to loosen. Out of that original sample, all clips remained tight and there was no fuel leakage. At the same time, laboratory testing was being conducted of similar samples using high-pull force, as well as vibration and fluid pressures exceeding the maximum fuel pump flow rate.
Testing Results:
- Approximately 200 vehicles inspected
- No loose clips in initial sample
- High-pressure tests completed
- Severe vibration testing conducted
- Properly locked joints remained secure
At the lab, the connector housing fractured from too much longitudinal tension and prior to a correctly seated retaining clip disengaging. Engineers tested harmonic vibration, water immersion and different road speeds. That did not dislodge correctly mated connections. The company in the filings also told safety regulators that foreign regulators have asked whether that separation was “possible only if the retaining clip was not correctly seated” and said it has not identified a design or manufacturing flaw.

7. What Happens If the Fuel Line Separates While Driving?
Toyota continued testing the severed fuel line in spring and summer 2026. An engineer brought the car to a test course while sealing off the doors and shutting the fuel pump, simulating a line coming loose. As soon as the gasoline engine failed and the warning message appeared on the dashboard, the hybrid system went exclusively into battery powered EV mode, which kept propelling the car at low speeds until the high-voltage pack had been drained.
Vehicle Response During Testing:
- Fuel pump power interrupted
- Dashboard warnings activated
- Gasoline engine shut down
- Electric-only driving mode activated
- Reduced power maintained temporarily
Testing, too, showed that, if desired, a pressure washer and high-pressure air nozzles would not pull a fully latched connector out of the retaining clip. Toyota examined fuel spray and temperatures of areas around chassis parts with thermal scans. Exhaust and suspension parts in the vicinity ran below gasoline auto-ignition temperature, but a loose connection would spray a whole car’s worth of gasoline until the fuel pump shuts off, which would have been a big fire risk with an ignition source.

8. Field Reports, Warranty Claims, and the Reported Defect Rate
Cruisers were inspected at customers’ locations throughout the US. A technician found one vehicle with a lifted retaining clip, although the fuel tube was still attached and there was no sign of a fuel leak. During review of the vehicle’s production and service history, Toyota found no root cause for the unlocked clip. As of October 8, 2026, Toyota has received 23 field technical reports and 64 warranty claims related to a potential loosening of fuel-line joints.
Recall Investigation Numbers:
- 400 additional vehicles inspected
- One lifted clip discovered
- 23 field technical reports
- 64 potentially related warranty claims
- Voluntary campaign approved October 8
Toyota wasn’t able to give an exact figure for the proportion of its vehicles with the potential issue. But regulators’ reporting system requested that automakers file a rounded number in that field and Toyota submitted the number 1, because it was unsure what proportion of its cars actually had the problem. That is not to be confused for the proportion of the Land Cruiser vehicles at the automaker with the problem. Owners who are concerned should look up each VIN one-by-one to confirm.

9. Toyota’s Free Repair and How Owners Can Check Their SUVs
During Toyota’s repair, a visual inspection of the connection of the fuel tube near the tank will be performed and a supplemental clamp will be installed. A Toyota dealership technician will secure the assembly so that the two halves cannot be separated if the original retaining clip fails. If during inspection a technician observes scoring, abnormal wear or any damage to the resin fuel tube, the entire fuel tube will be replaced prior to installing the supplemental clamp.
Repair and Owner Actions:
- Visit an authorized Toyota dealership
- Inspect the fuel tube connection
- Install supplemental securing clamp
- Replace damaged resin tubing
- No-cost recall repair
Notification mailing started for all owners of recalled vehicles November 29-December 13, 2026. If you are a registered owner, your Notice Letter may arrive as late as December 13, 2026. Check for the remedy without the notice letter. If your vehicle is on the recall list, check whether Toyota has made clamps available by visiting Toyota’s NHTSA portal, or entering your 17 digit vehicle identification number into NHTSA’s database. Confirm clamp availability at your dealer prior to seeking the remedy.

10. Previous Recall, Fuel Smell Precautions, and Owner Guidance
The fuel-line action isn’t linked to a previous Toyota Land Cruiser recall for the digital combination meter. That recall, announced in May, affected nearly 82,000 vehicles, including 2024 and 2025 Land Cruiser SUVs, plus Mirai sedans and Lexus UX and GX SUVs. That notice also involved a display that could go completely blank after starting the vehicle and was performed as a computer reflash, which doesn’t meet a separate physical fuel-line inspection in campaign 26V673.
Important Safety Reminders:
- Check your vehicle’s recall status
- Arrange the required inspection
- Confirm dealership clamp availability
- Park outdoors if fuel smells
- Contact Toyota for assistance
If a Land Cruiser owner notices the aroma of raw fuel, the SUV should be parked outside in an open area away from any attached garages or other structures. The owner should also contact a local authorized Toyota dealer or the Toyota Brand Engagement Center at 1-800-331-4331. This additional clamp holds the fuel connection in place and corrects the issue, a recall owner can check if their SUV is included in the recall by reviewing a service notification.